SEAL

Designed by pro riders, mechanics and scientists, Peaty’s Tubeless Rim Tape has been developed from the ground up as a bicycle rim tape.

AVAILABLE SIZES

21mm, 25mm, 30mm, 35mm

** All Peaty's Tubeless Rim Tape's come in lengths of 9 meters / ~10 Yards! **

The super high tensile strength tape is primed with a bespoke adhesive which clings like s**t to a blanket.

An optimum amount of stretch and large rigid recyclable core allows the tape to be pulled and applied with tension, contouring your rim tightly for a better fit.

Do you struggle to find the hole? No problem!
Just hold your rim up to the light and the tape’s semi-transparent finish will illuminate the way.

Fitting instructions:

1. Remove tyre and any old rim tape
2. Clean and degrease rim thoroughly
3. Ensure rim is completely dry before application
4. Press tape firmly into the centre of the rim and smooth out to the edges, removing any trapped air
5. Run tape around the rim while keeping tape tension and allowing for at least 10cm overlap of tape at the end when cut
6. Use a small spike to pierce the tape in the centre of the valve hole
7. Remove dust cap and Push valve through the valve hole
8. Apply lock ring tightly by hand, ensuring there are no air gaps
9. Refit tyre, add Peaty’s Tubeless sealant, inflate Tyre
10. Ride!

Don't let a flat ruin your ride.

Our unique trail pouch has been designed to get you started with enough sealant to do two 27.5" wheels, and to be the perfect emergency refill when out on the trails or at the races.

Chuck it into your trail bag, glovebox or toolbox and use the 60ml filling guide printed onto the rear of the pouch to assist with topping up. The spout has also been designed to assist with injecting through a de-cored valve, or directly into the tyre - whichever you prefer!

Don't throw it away though - simply refill your old pouch from our 1ltr workshop bottle and you're good to go again!

⚠️ WAIT, IS THAT PLASTIC GLITTER?!

Hell no! No micro-plastics or microfibres here… The platelets in our sealant are BioGlitter made from a special form of cellulose from hardwoods, primarily eucalyptus sourced from responsibly managed and certified plantations operating to PEFC™ standards. They work like platelets in your blood, building up behind holes to help our fast acting sealant form an even stronger bond with the rubber in your tyre.

Don't let a flat ruin your ride.

Our monster 5ltr workshop pump tub has a pump spout to measure out sealant in 20ml shots so you don't have to use messy measuring cups like with other sealants.

Simply fill the tyre directly or use this to fill up the smaller 1ltr bottle or 120ml trail pouches.

⚠️ WAIT, IS THAT PLASTIC GLITTER?!

Hell no! No micro-plastics or microfibres here… The platelets in our sealant are BioGlitter made from a special form of cellulose from hardwoods, primarily eucalyptus sourced from responsibly managed and certified plantations operating to PEFC™ standards. They work like platelets in your blood, building up behind holes to help our fast acting sealant form an even stronger bond with the rubber in your tyre.

Designed by pro riders, mechanics and scientists, Peaty’s Tubeless Rim Tape has been developed from the ground up as a bicycle rim tape.

AVAILABLE SIZES

21mm, 25mm, 30mm, 35mm

** All Peaty's Tubeless Workshop Rim Tape's come in lengths of 50m meters / ~55 Yards! **

The super high tensile strength tape is primed with a bespoke adhesive which clings like s**t to a blanket.

An optimum amount of stretch and large rigid recyclable core allows the tape to be pulled and applied with tension, contouring your rim tightly for a better fit.

Do you struggle to find the hole? No problem!
Just hold your rim up to the light and the tape’s semi-transparent finish will illuminate the way.

Fitting instructions:

1. Remove tyre and any old rim tape
2. Clean and degrease rim thoroughly
3. Ensure rim is completely dry before application
4. Press tape firmly into the centre of the rim and smooth out to the edges, removing any trapped air
5. Run tape around the rim while keeping tape tension and allowing for at least 10cm overlap of tape at the end when cut
6. Use a small spike to pierce the tape in the centre of the valve hole
7. Remove dust cap and Push valve through the valve hole
8. Apply lock ring tightly by hand, ensuring there are no air gaps
9. Refit tyre, add Peaty’s Tubeless sealant, inflate Tyre
10. Ride!

Convert your bike to tubeless with a complete Peaty's kit.

Peaty’s Tubeless Conversion Kit includes everything you need to run a fully optimised tubeless setup – Peaty’s RimJob Rim Tape, Tubeless Valves and Sealant. If you value more time spent on the bike and less time fixing punctures, this is the perfect set up.

Not just a few bits thrown carelessly in a bag! Peaty's Tubeless Conversion kits are beautifully laid out with easy to follow setup instructions. These conversion kits are available in a variety of configurations so that you can ride with the perfect tubeless set up whatever your discipline: road, cyclocross, XC, enduro, downhill – all good to go. Every conversion kit features a handy installation guide on the box, with QR links to step by step YouTube videos for each stage of installation – rest assured that the installation process will be slick and swift.

Tubeless conversion kit with:

• 2x 60mm tubeless valves,
• 1x 21mm RimJob rim tape,
• 1x 120ml TrailPouch

Convert your bike to tubeless with a complete Peaty's kit.

Tubeless conversion kit with:

• 2x 40mm tubeless valves,
• 1x 25mm RimJob rim tape,
• 2x 120ml TrailPouch

Don't let a flat ruin your ride.

Our unique trail pouch has been designed to get you started with enough sealant to do two 27.5" wheels, and to be the perfect emergency refill when out on the trails or at the races.

Chuck it into your trail bag, glovebox or toolbox and use the 60ml filling guide printed onto the rear of the pouch to assist with topping up. The spout has also been designed to assist with injecting through a de-cored valve, or directly into the tyre - whichever you prefer!

Don't throw it away though - simply refill your old pouch from our 1ltr workshop bottle and you're good to go again!

⚠️ WAIT, IS THAT PLASTIC GLITTER?!

Hell no! No micro-plastics or microfibres here… The platelets in our sealant are BioGlitter made from a special form of cellulose from hardwoods, primarily eucalyptus sourced from responsibly managed and certified plantations operating to PEFC™ standards. They work like platelets in your blood, building up behind holes to help our fast acting sealant form an even stronger bond with the rubber in your tyre.

Don't let a flat ruin your ride.

Our unique trail pouch has been designed to get you started with enough sealant to do two 27.5" wheels, and to be the perfect emergency refill when out on the trails or at the races.

Chuck it into your trail bag, glovebox or toolbox and use the 60ml filling guide printed onto the rear of the pouch to assist with topping up. The spout has also been designed to assist with injecting through a de-cored valve, or directly into the tyre - whichever you prefer!

Don't throw it away though - simply refill your old pouch from our 1ltr workshop bottle and you're good to go again!

⚠️ WAIT, IS THAT PLASTIC GLITTER?!

Hell no! No micro-plastics or microfibres here… The platelets in our sealant are BioGlitter made from a special form of cellulose from hardwoods, primarily eucalyptus sourced from responsibly managed and certified plantations operating to PEFC™ standards. They work like platelets in your blood, building up behind holes to help our fast acting sealant form an even stronger bond with the rubber in your tyre.

Don't let a flat ruin your ride.

Our unique trail pouch has been designed to get you started with enough sealant to do two 27.5" wheels, and to be the perfect emergency refill when out on the trails or at the races.

Chuck it into your trail bag, glovebox or toolbox and use the 60ml filling guide printed onto the rear of the pouch to assist with topping up. The spout has also been designed to assist with injecting through a de-cored valve, or directly into the tyre - whichever you prefer!

Don't throw it away though - simply refill your old pouch from our 1ltr workshop bottle and you're good to go again!

⚠️ WAIT, IS THAT PLASTIC GLITTER?!

Hell no! No micro-plastics or microfibres here… The platelets in our sealant are BioGlitter made from a special form of cellulose from hardwoods, primarily eucalyptus sourced from responsibly managed and certified plantations operating to PEFC™ standards. They work like platelets in your blood, building up behind holes to help our fast acting sealant form an even stronger bond with the rubber in your tyre.

Convert your bike to tubeless with a complete Peaty's kit.

Tubeless conversion kit with:

• 2x 42mm tubeless valves,
• 1x 35mm RimJob rim tape,
• 2x 120ml TrailPouch

Don't let a flat ruin your ride.

Our unique trail pouch has been designed to get you started with enough sealant to do two 27.5" wheels, and to be the perfect emergency refill when out on the trails or at the races.

Chuck it into your trail bag, glovebox or toolbox and use the 60ml filling guide printed onto the rear of the pouch to assist with topping up. The spout has also been designed to assist with injecting through a de-cored valve, or directly into the tyre - whichever you prefer!

Don't throw it away though - simply refill your old pouch from our 1ltr workshop bottle and you're good to go again!

⚠️ WAIT, IS THAT PLASTIC GLITTER?!

Hell no! No micro-plastics or microfibres here… The platelets in our sealant are BioGlitter made from a special form of cellulose from hardwoods, primarily eucalyptus sourced from responsibly managed and certified plantations operating to PEFC™ standards. They work like platelets in your blood, building up behind holes to help our fast acting sealant form an even stronger bond with the rubber in your tyre.

Convert your bike to tubeless with a complete Peaty's kit.

Tubeless conversion kit with:

• 2x 42mm tubeless valves,
• 1x 30mm RimJob rim tape,
• 2x 120ml TrailPouch

To honor all the lives sacrificed, we are releasing a patriot MK2 Valve Kit!

Available in 42mm, 60mm, and 80mm valve lengths.

The kit comes complete with a silver valve, a red accessory kit and a blue accessory kit, all for one low price to honor our troops!

With design, sustainability & quality running right to the core, there’s only one company we could work with on our valve colors - Chris King! With our valves for life guarantee and their stunning colorways, your bike is in for a real treat for years to come.

Made from premium lightweight, high strength 7075 aluminum, Peaty’s MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims.

Our unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, our valves have a ‘straight-through’ design so there’s no reduction of sealant or airflow when tyre inserts are not used.

Fitting couldn’t be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal.

Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails.

Crushed a rubber or snapped an o-ring? No problem, check out our maintenance kits to spruce up your valves when swapping to your next set of wheels or a new bike. 

Instructions

1. Remove valve cap, o-ring and lock nut
2. Insert valve through valve hole in rim
3. Push the o-ring onto valve stem
4. Thread the lock nut onto valve stem
5. hand tighten lock nut until firm
6. Screw on valve cap