TUBELESS VALVES

PEATY'S X CHRIS KING TUBELESS VALVES

Introducing Peaty's X Chris King Tubeless Valves - available in 10 official Chris King colors.

With design, sustainability & quality running right to the smoked black core, Peaty's Tubeless Valves are now available as a perfect match for your Chris King hubs.

Made from lightweight anodised 7075 aluminium, Peaty’s X Chris King Tubeless Valves are available in 42mm and 60mm lengths and fit most tubeless rims including carbon, Enduro and DH rims.

AVAILABLE IN 10 COLORS

in 42mm and 60mm LengthS

Matte Slate
Bourbon
Matte Mango
Navy Blue
Matte Punch
Silver
Red
Violet
MatTE TURQOISE
BLACK

SUITABLE FOR MOST TUBELESS RIMS

The large soft rubber base easily creates an airtight seal on valve holes up to 8mm diameter and the integrated valve core remover caps make removing the valve and topping up with sealant a breeze when in the workshop or on the trails.

VALVES FOR LIFE GUARANTEE

As with all Peaty's Tubeless Valves - If you manage to break, snap, bend or crack our valves* then we'll fix or replace them free of charge!

(Pair)

Sold out

FITTING INSTRUCTIONS

  1. Remove valve cap, o-ring and lock nut
  2. Insert valve through valve hole in rim
  3. Push the o-ring onto valve stem
  4. Thread the lock nut onto valve stem
  5. Hand tighten lock nut until firm
  6. Screw on valve cap

FITTING INSTRUCTIONS

  1. Remove valve cap, o-ring and lock nut
  2. Insert valve through valve hole in rim
  3. Push the o-ring onto valve stem
  4. Thread the lock nut onto valve stem
  5. Hand tighten lock nut until firm
  6. Screw on valve cap

VALVE CORE REMOVAL

To de-core the valve, all you need to do is:

  1. Unscrew the valve cap
  2. Slot the valve cap over the valve core
  3. Twist anti-clockwise until the core can be pulled out
  4. Repeat in reverse to refit.

VALVE CORE REMOVAL

To de-core the valve, all you need to do is:

  1. Unscrew the valve cap
  2. Slot the valve cap over the valve core
  3. Twist anti-clockwise until the core can be pulled out
  4. Repeat in reverse to refit.

VALVES FOR LIFE GUARANTEE*

Ok, so there's a few conditions:
Valves are warranted for life to the original owner only.
Valves will not be warranted in the following situations:

  • If they have snapped or threaded from being over-tightened

  • If they have clogged with sealant

  • If they have been intentionally broken

  • If parts have been lost

The return process is easy - simply email us to let us know you'd like to submit a warranty claim and we'll get back to you ASAP.
Please ensure you have a photo or PDF of your proof of purchase and photos of your damaged valves ready to send us.