Peaty's Foaming Drivetrain Degreaser is the ultimate bike specific, high strength foaming drivetrain degreaser.
Our powerful biodegradable formula has been designed to be tough on grime for fast and powerful drivetrain degreasing, while remaining kind to the rest of your bike and the environment.
Apply liberally to the cassette while cycling the chain backwards, building up a thick layer of foam.
Apply directly to any other areas not already coated such as crank arms, derailleur bodies or jockey wheels.
If you have a bike stand, run through all of your gears several times to agitate the grime.
Agitate any stubborn areas where needed then leave to soak for two minutes.
Rinse off thoroughly with clean water.
Dry the chain using a clean cloth.
Apply Peaty's LinkLube
BOGO Peaty's LinkLube All-Weather 120ml / 4oz
Born in the lab and raised between the tapes, Peaty's Link Lube is a minty fresh, triple distilled, ultra high speed chain oil for use in all conditions.
Our unique formula penetrates and cleans deep inside your chain, driving out moisture, grit and grime and replacing them with unique blend of oils and waxes (Peaty's secret sauce) to lubricate and protect.
Yes, you read that correctly!
Peaty's Link Lube actually cleans your chain as you use it!
Always fully degrease your drivetrain before applying fresh lube. For best results, use Peaty's Drivetrain Degreaser.
Ensure you thoroughly wash your chain with clean water after degreasing (degreaser is designed to eat chain oil after all).
Remove as much water as you can from the chain - a quick wipe with a clean cloth will do fine.
Give the bottle a good shake to evenly distribute the secret sauce.
Apply the lube while cycling the chain backwards (eBikes will need to be pedalled forwards in a stand) ensuring every link is adequately covered.
Keep cycling the chain for 10seconds or so to help the lube work its way into your chain.
Thoroughly wipe away all excess lube from your chain using a clean cloth (excess oil on the outside of the chain will attract dust in dry conditions).
For wet weather conditions, leave a small amount of lube on the outside of the chain for longer-lasting protection.
On first use with pre-used chains, you may find that your chain turns black - this is the LinkLube driving out grime from deep in your chain. Just keep riding, degreasing, lubing and repeating until your chain runs shiny clean once more!
Caution - Do not get LinkLube (or any lube for that matter!) on your brakes or brake pads.
Peaty’s tubeless sealant is an ammonia-free, non-hazardous, latex-based tubeless tyre sealant compound. Our sealant lasts up to 6 months in the tyre in temperate climates*, won’t ball up in the tyre and is easily washed out with water.
The lightweight formula seals quickly and effectively, while our biodegradable glitter platelets take care of holes and tears up to 6mm. Added corrosion inhibitors prevent degradation of tyres and rims.
Our unique trail pouch has been designed to get you started with enough sealant to do two 27.5" wheels, and to be the perfect emergency refill when out on the trails or at the races.
Chuck it into your trail bag, glovebox or toolbox and use the 60ml filling guide printed onto the rear of the pouch to assist with topping up. The spout has also been designed to assist with injecting through a de-cored valve, or directly into the tyre - whichever you prefer!
Don't throw it away though - simply refill your old pouch from our 1ltr workshop bottle and you're good to go again!
⚠️ WAIT, IS THAT PLASTIC GLITTER?!
Hell no! No micro-plastics or microfibres here… The platelets in our sealant are BioGlitter made from a special form of cellulose from hardwoods, primarily eucalyptus sourced from responsibly managed and certified plantations operating to PEFC™ standards. They work like platelets in your blood, building up behind holes to help our fast acting sealant form an even stronger bond with the rubber in your tyre.
BOGO Peaty's x Chris King (MK2) Tubeless Valves Accessory Kit
LIMITED COLORS AND AVAILABILITY
Whether you’ve lost a valve cap or just want to bling your existing pair of peaty’s valves, this kit gives you everything you need.
Each Package contains: 1x spoke key cap (for 3.4mm spoke nipple) 1x valve core remover cap 2x lock rings
Compatible with all Peaty’s Tubeless Valves
Reuse. Refresh. Recycle.
Did you know we also make maintenance kits with fresh o-rings, rubbers & valve cores?