Loam Foam + Degreaser + Link Lube

Peaty's Loam Foam is a professional grade bike cleaner that will shift dirt fast.

The solution is biodegradable and safe on all bike surfaces including discs and pads. No need to rinse the bike before use!

Simply apply Peaty's loam foam liberally to the entire bike, wait for 3 - 5 minutes (time for a coffee/beer) and blast off with clean water.

Stubborn and impregnated dirt may need to be persuaded to vacate your valiant steed with a soft bristled brush, then rinsed off with cold water.

Born in the lab and raised between the tapes, Peaty's Link Lube is a minty fresh, triple distilled, ultra high speed chain oil for use in all conditions.

Our unique formula penetrates and cleans deep inside your chain, driving out moisture, grit and grime and replacing them with unique blend of oils and waxes (Peaty's secret sauce) to lubricate and protect.

Yes, you read that correctly!

Peaty's Link Lube actually cleans your chain as you use it!

Application

1. Always fully degrease your drivetrain before applying fresh lube. For best results, use Peaty's Drivetrain Degreaser. 
2. Ensure you thoroughly wash your chain with clean water after degreasing (degreaser is designed to eat chain oil after all). 
3. Remove as much water as you can from the chain - a quick wipe with a clean cloth will do fine. 
4. Give the bottle a good shake to evenly distribute the secret sauce. 
5. Apply the lube while cycling the chain backwards (eBikes will need to be pedalled forwards in a stand) ensuring every link is adequately covered. 
6. Keep cycling the chain for 10seconds or so to help the lube work its way into your chain. 
7. Thoroughly wipe away all excess lube from your chain using a clean cloth (excess oil on the outside of the chain will attract dust in dry conditions).

Tips:

1. For wet weather conditions, leave a small amount of lube on the outside of the chain for longer-lasting protection.
2. On first use with pre-used chains, you may find that your chain turns black - this is the LinkLube driving out grime from deep in your chain. Just keep riding, degreasing, lubing and repeating until your chain runs shiny clean once more!

Caution - Do not get LinkLube (or any lube for that matter!) on your brakes or brake pads.

Peaty's Foaming Drivetrain Degreaser is the ultimate bike specific, high strength foaming drivetrain degreaser.

Our powerful biodegradable formula has been designed to be tough on grime for fast and powerful drivetrain degreasing, while remaining kind to the rest of your bike and the environment.

Application

1. Apply liberally to the cassette while cycling the chain backwards, building up a thick layer of foam.
2. Apply directly to any other areas not already coated such as crank arms, derailleur bodies or jockey wheels.
3. If you have a bike stand, run through all of your gears several times to agitate the grime.
4. Agitate any stubborn areas where needed then leave to soak for two minutes.
5. Rinse off thoroughly with clean water.
6. Dry the chain using a clean cloth.
7. Apply Peaty's LinkLube