WORKSHOP

Designed by pro riders, mechanics and scientists, Peaty’s Tubeless Rim Tape has been developed from the ground up as a bicycle rim tape.

AVAILABLE SIZES

21mm, 25mm, 30mm, 35mm

** All Peaty's Tubeless Workshop Rim Tape's come in lengths of 50m meters / ~55 Yards! **

The super high tensile strength tape is primed with a bespoke adhesive which clings like s**t to a blanket.

An optimum amount of stretch and large rigid recyclable core allows the tape to be pulled and applied with tension, contouring your rim tightly for a better fit.

Do you struggle to find the hole? No problem!
Just hold your rim up to the light and the tape’s semi-transparent finish will illuminate the way.

Fitting instructions:

1. Remove tyre and any old rim tape
2. Clean and degrease rim thoroughly
3. Ensure rim is completely dry before application
4. Press tape firmly into the centre of the rim and smooth out to the edges, removing any trapped air
5. Run tape around the rim while keeping tape tension and allowing for at least 10cm overlap of tape at the end when cut
6. Use a small spike to pierce the tape in the centre of the valve hole
7. Remove dust cap and Push valve through the valve hole
8. Apply lock ring tightly by hand, ensuring there are no air gaps
9. Refit tyre, add Peaty’s Tubeless sealant, inflate Tyre
10. Ride!

Developed from our much-loved Loam Foam cleaner, a single one litre bottle of Loam Foam concentrate will make five litres of professional grade Loam Foam Bike cleaner.

Once diluted, you will get the same foamy cleaning power that you get with the ready-mixed Loam Foam you know and love, but use 80% less plastic and take up much less space in your workshop. Win win!

Mixing Instructions:

1. Pour 200ml of Loam Foam Concentrate into an empty Loam Foam spray bottle using the markers provided on the side of the concentrate bottle.
2. Top up the bottle with fresh cold water, up to the shoulder of the bottle.
3. Replace the sprayer and tighten until firm.
4. Shake the bottle vigorously until fully mixed.
5. You're ready to go!

Convert your bike to tubeless with a complete Peaty's kit.

Tubeless conversion kit with:

• 2x 40mm tubeless valves,
• 1x 25mm RimJob rim tape,
• 2x 120ml TrailPouch

Developed from our much-loved Loam Foam cleaner, a single one litre bottle of Loam Foam concentrate will make five litres of professional grade Loam Foam Bike cleaner.

Once diluted, you will get the same foamy cleaning power that you get with the ready-mixed Loam Foam you know and love, but use 80% less plastic and take up much less space in your workshop. Win win!

Mixing Instructions:

1. Pour 200ml of Loam Foam Concentrate into an empty Loam Foam spray bottle using the markers provided on the side of the concentrate bottle.
2. Top up the bottle with fresh cold water, up to the shoulder of the bottle.
3. Replace the sprayer and tighten until firm.
4. Shake the bottle vigorously until fully mixed.
5. You're ready to go!